MATEX
Contact Us
Contact MATEX
Open menu
Quick Contact
X

    Navigation
    Close menu
    Theme Color
    Light Dark

    Anchoring and Grouting

    Epofix FX two-part epoxy polyurethane flowable adhesive for stone, metal and concrete by MATEX

    Epofix Fx

    High Performance Two-Part Epoxy Polyurethane Flowable Adhesive

    EPOFIX FX is a solvent-free, flowable epoxy polyurethane adhesive engineered for high-performance bonding, sealing, coating, and casting applications. This two-part system cures at room temperature and offers excellent mechanical strength combined with long-term flexibility. Designed for demanding environments, it provides superior substrate wetting, low shrinkage, and outstanding resistance to impact and vibration. Its elastomeric nature allows it to absorb stress between materials with differing thermal expansion rates, making it ideal for heavy-duty applications where controlled movement is required. EPOFIX FX delivers durable performance and reliable adhesion across a wide range of industrial and structural uses.

    Technical data:
    • Appearance/Color : Flowable liquid/light beige
    • Mixing ratio by weight : 7:10
    • Application temperature : 5°C to 35°C
    • Coverage : 1 liter per 1 square meter @ 1 mm thickness
    • Packaging : 1 & 4 liter kit
    Related Documents:

    How to Apply Epofix Fx

    Epofix FX is a solvent-free two-part epoxy polyurethane adhesive applied as a thin film to both surfaces or poured into gaps.

    1. Prepare the surface. All surfaces must be sound, dry and perfectly clean, with loose particles, varnishes and grease removed by sand blasting or brushing. Concrete must be cured for at least 21 days and porous supports should be primed with Armoprime EP100; metals should be degreased and abraded or acid etched.
    2. Prepare other substrates. Wipe PVC with a rag soaked in trichloroethylene. Timber must be dry, lightly sanded and cleaned; degrease and abrade glass, ceramic and plastic.
    3. Mix. Mix Part A separately for 2 minutes, then add Part B to the Part A container and mix with a low-speed mixer (200-300 rpm) until homogeneous and lump free. Scrape the sides and base of the container periodically, and avoid partial mixing.
    4. Apply. Apply the mix to both surfaces as a thin even film with a smooth spatula or trowel, then join the elements and hold them tight until Epofix FX has fully hardened. For larger sections, pour the mix slowly into the gaps, avoiding air entrapment.
    5. Finish the joint. Position the elements before the adhesive starts to cure and avoid excess pressure that would extrude the adhesive. Remove excess adhesive and clean the area.
    6. Clean tools. Clean all tools with Armosolvent before hardening. Hardened material can only be removed mechanically.

    Summary of the method in the Epofix Fx Technical Data Sheet. Always follow the full TDS on site.

    Standards & Test Methods

    StandardTitleReferenced for
    ASTM D412Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—TensionElongation and tensile strength
    ASTM D4541Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion TestersPull-off strength

    Standards and test methods as referenced in the Epofix Fx Technical Data Sheet. Values in the TDS are typical laboratory results under standard conditions.

    Frequently Asked Questions

    What is the mixing ratio and pot life of Epofix FX?

    The mixing ratio by weight is 7:10. Pot life of the mixture is approx. 60 minutes at 25°C.

    What is the coverage of Epofix FX?

    Epofix FX covers approx. 1 square meter per liter at 1.0 mm thickness. Coverage is approximate and depends on site conditions.

    What materials can Epofix FX bond?

    It is used to glue natural or artificial stone, marble and granite, and most building materials such as aluminum elements, artificial humps, corner guards, cat eyes, steel, directional signs, glass, timber, concrete and asbestos.

    What temperature can Epofix FX be applied at?

    The application temperature is +5ºC to +35ºC.

    How is Epofix FX packed and stored?

    It is supplied as a two-component kit in metal containers of 1 and 4 liters. Stored in original packing in a dry covered shed between 10ºC and 30ºC, shelf life is 12 months.

    Quick Contact